AliceThe new EVO3 Mosiac Genesis is a five-way mains conditioning unit in a half-width format, featuring three outlets for front-end source components and preamplifiers and two for high-current amplifiers and subwoofers.
The front-end is driven by a mains regenerator, which features a synchronous sine wave generator that builds a completely new mains waveform.
This new waveform is completely independent of the frequency of the incoming mains to protect against harmonic distortions in the newly generated electricity supply.
The signal is then amplified by a class AB amplifier and fed to an output transformer, with copper foil between the primary and secondary outputs to prevent any noise or distortion from passing through the unit. The result is a continuous output of 150W (300W peak).
Not stopping there, EVO3 Mosaic Genesis also controls the mains voltage, ensuring that the output voltage is maintained at 230V +/- 2%; compared to the recommended European standard of 230V +/- 10%.
The end result is a consistent 230V/50Hz mains sine wave with low levels of distortion, independent of the input quality of the power supply.
Whatever the level of distortion of the incoming supply, IsoTek claims that the EVO3 Mosaic Genesis delivers a total harmonic distortion of between 0.05% and 0.17% with typical loads, remaining below 0.3% with even the most complex loads.
The EVO3 Mosaic Genesis’ two high-current outlets feature IsoTek’s Direct-Coupled technology, which provides optimal high-current low impedance filtering while maintaining the performance of power amplifiers, monoblocks, active loudspeakers and subwoofers.
The EVO3 Mosaic Genesis’ internal wiring takes on IsoTek’s newly developed UP-OCC (Ultra Pure Ohno Continuous Cast) copper solid core internal wire, which is silver-plated before being insulated with Teflon.
The EVO3 Mosaic Genesis also guards against the effects of power spikes and surges, featuring considerable 100,000A of instantaneous protection.