AliceOrigin Acoustics is unveiling three models in its ThinFit loudspeaker collection at ISE 2015.
Designed specifically for installations with limited depth requirements, all three models feature an integrated back-can with a 70mm depth.
“We saw this as a necessity,” remarks Jeremy Burkhardt, Origin’s CEO. “The construction methods in MDU’s and some geographic areas demand a very thin profile. The idea was to limit depth without limiting performance. The ThinFit Collection delivers on both counts.”
The TF34 and TF 36 share a similar driver configuration; dual 88mm woofers and dual 88mm midwoofers surround a 20mm tweeter.
The TF34 features injection molded graphite woofers and midwoofers with an aluminium tweeter, while the TF36 offers glass fibre woofers and a silk-dome tweeter.
Both are mounted on an injection-moulded baffle that integrates into the steel back-can creating a ported enclosure.
The TF64DT features a 17cm dual voice-coil, IMG woofer and two 20mm aluminium tweeters.
These are also mounted on an injection-moulded baffle, which attaches to a steel back-can creating a sealed enclosure.
The dual-tweeter design allows both left and right channels to be produced from a single speaker.
The acoustic dampening enclosures are fully integrated with the woofers and reportedly cut down on room-to-room sound transfer by up to 9dB.
The ThinFit Collection will begin shipping in April 2015.
Visit Origin Acoustics at ISE 2015 at 5:S123.