Jordan O'BrienMeet EX50, our new HDMI extender set with built-in splitter and ARC audio extraction capable of delivering 1080p/60hz with two-way IR up to 50m/164ft over a single Cat5e/Cat6 cable.
The HDMI loop output, designed for use with a local display or AVR, eliminates the need for an add-on splitter, enabling the product to act as a handy 2-in-1 extender / splitter that helps integrators minimize expenditure and achieve neater installs.
If used with an ARC-equipped display, up to 5.1 audio can be extracted via the digital COAX break-out for use with an upcycled amplifier, for example. EX50 has two-way IR pass-through, allowing for control at both source and display locations.
EX50 features a manual EDID learning mode and an auto EDID learning mode. Nine selectable on-board EDID modes, as well as two copy EDID modes, are available to help installers guarantee that the desired video/audio format is delivered to the display.
Every EX50 is supplied with a transmitting and receiving unit, one pair of IR transmitters and one pair of IR receivers, two 5V 1A DC in-line power supplies, and a pair of rack-mounting ears. Though non-PoE, the transmitter can be powered by HDanywhere™ USB to 5V power leads (these must be purchased separately from EX50).
Key Features:
- Transmits 1080p 24-bit colour HD video, audio (up to 7.1 ch) and IR signals up to 50m over a single Cat5e/Cat6 cable.
- Dual output on transmitter for daisy-chaining a local source.
- ARC for two way communication between ARC-equipped displays and receivers. Co-axial break-out for audio extraction.
- Supports true deep colour video, DTS-HD or Dolby TrueHDaudio, and 3D. Works with HDMI and HDCP-compliant devices.
- EDID management tools (nine selectable on-board EDID modes and two EDID copy modes).
- Two-way IR.
For trade pricing and to purchase EX50 contact sales@hdanywhere.com.